The ticket addition is reserved exclusively for members.

  • tricycle ambulance for africa

    tricycle ambulance for africa

    Continue reading

  • Color steel coil

    Pre-painted Color steel coil, 1st grade, based GI/GL
    Packing : standard export steel packed
    Origin : Korea
    Provide : CEPA and BIS and MTC
    Thickness : 0.34mm – 1.25mm
    Width : 735mm - 1528mm
    Length : Coil
    Q’ty : 133.577MT(selection base)

    Continue reading

  • H BEAM

    H BEAM, prime quality,

    Packing : Bare

    Total Q'ty : about 1638.120MT

    Stocked list : H-BEAM-190403.xlsx

    Continue reading


    EGI steel coil, prime quality, JIS G3313, 20/20, Anti-finger/Phosphate/oil/dry
    Packing : Standard export steel packed
    Origin : Korea
    Thickness : 0.36mm – 2.30mm
    Width : 767mm - 1347mm
    Length : Coil
    Q’ty : 327.920MT(selection base

    Continue reading


    GI steel coil, prime quality, CQ, Z80-180, zero spangle, Chromate/Dry

    Packing : Standard export packed

    Thickness : 0.42mm – 0.50mm

    Width : 914mm – 1290mm

    Length : Coil

    Q’ty : 1800MT

    Continue reading

  • I need job supervisor/engineer level

    Address: Saudi Arabia, Dammam
    Mobile # +966593526311 & +923213634475

    To seek a progressive organization that provides a professional working
    Atmosphere and opportunities for advancement of bringing my abilities
    To the organization’s growth. My task is to acquire new challenges
    Which will effectively utilize my professional experience and exposure as
    Well as becoming a significant force within it in the service oriented industry

     Bachelor Of Technology in Electronic 2011
    From Indus Institute of Higher Education Karachi

     Diploma Associate of Engineer in Electronic 2008
    From Govt Jamia Millia Polytechnic Institute Karachi

     Technical School Certificate in Computer Science 2005
    From Govt Jamia Millia Vocational Institute Karachi


     Aramco Moderisation Project Of Amhec (KSA)
    Maintenance Team Leader
    (From October 2016 to till to Date)

    • Role & Responsibilities:
    • I am working on below earth moving machinery & heavy equipment
    • Crane Tadano GR 60T, 70T, 80T
    • Crane Liebherr LTM 50T, 70T,100T,150T,200T,300T,500T
    • Loader Doosan Mega 400,420 8T
    • Loader Caterpillar 966 10T
    • Tower light, Generator Perkin`s, Olympian, Caterpillar,
    Cummins capacity range 100kva to 1250kva
    • Truck Mercedes Benz, Man, Trailer, and also Light vehicle
    • Looking & manage Routine, break down & Maintenance team
    • Planning of equipment PMS schedule and also manage the team
    • Attend the equipment diagnostics fault and troubleshooting
    • Preparing daily and monthly maintenance report
    • Analyst of spare parts old, new & wear
    • Collect directly Spare parts quotation from vendor & also monitoring of spare parts quality
    • Planning to arrange the spare parts for equipments
    • Direct, manage and coordinate all aspects of operations of rental and leasing of construction and oil and gas equipment across Saudi Arab
    • Responsible for Store, ensuring adequate supply of spare parts / consumables and workshop equipment
    • Improving maintenance and reducing breakdowns through analysis of site and service reports
    • Strong technical knowledge of diesel engines and pump Supervision and Execution of Dewatering Projects for the Rental Division
    • Prepare schedules for repair, overhauling, and maintenance of all equipment and machinery
    • Provide technical support and guide line to all workshop employees
    • Manage over 50+ employees from maintenance departments workshops, paint & fabrication and asset control departments
    • Implemented & designed onsite mobile tool stores across multiple sites utilizing “Tool hound” barcoding system
    • Routinely visit customers to ensure service level satisfaction and promote new technical products
    • Followed to HSE rules & regulation during working in critical sites and also workshop

    Ministry of Electricity Power Station (MOE)
    Electrical Engineer O&M (From March 2015 to September 2016)

    Role & Responsibilities:
    • Power Plant total capacity 136 MW
    • Work on wartsila 18v46 Diesel Engine & ABB Generator
    • 11 kv/132 kv transmission and distribution lines
    • Routine check of SF-6 type circuit breaker, protection system and various control system and equipment
    • Substation medium voltage, LV and control panel
    • HT/LT motor & switch gear
    • Condition monitoring of motors, generator & purifiers prepared various report for maintaining record and to acknowledge authorities in case of any abnormality isolation and tripping
    • Performed Routine & break down Maintenance
    • Performed diagnostics fault and troubleshooting
    • Synchronization of several units
    • Load management as per the demand and production
    • I have hand on experience of major maintenances and good troubleshooting good skills on gas /diesel system.

    Shift Incharge (From May 2010 to January 2015)

    Role & Responsibilities:
    • Caterpillar G-3500 Series Engines Total Capacity Plant 5.7 MW
    • Focus of Artistic Milliners Denim Mill power plant operation and maintenance and plant erection
    • Services all equipment as CAT & Cummins Generator Waste Heat Recovery Boiler (D.D.F.C & GARION) Capacity 1 to 2 ton, compressor, R.O plant
    • Maintain all records and manage all PPM & top and major overhauling
    • All power plant Equipment and auxiliaries such as cooling tower, circulating pumps section, Heat exchanger and softener plant independently preventive maintenance
    • Supervise to all team members and participate with them in all troubleshooting maintenance team.
    • Assigned the tasks of diagnosing problems, disassembling engines, and replacing excessive wear engine parts
    • Prepare several type report just like consumption, daily, monthly
    • I can operate independently gas booster
    • I have work done both engine gas & diesel

     Allied Engineering & Services limited.
     Generator Technician (From March 2008 to April 2010)

    Role & Responsibilities:
    • Working on Caterpillar 3500,3400 & 3300 series Gas & Diesel Sector
    • Pre Delivery Inspection, start-up and Load test activities.
    • Verification of engine protection safeties.
    • Reading of product manual & schematic diagram
    • Using diagnostic tools ET (Electronic Technician), DDT (Digital Diagnostic tool) megger, multi meter etc.
    • Installation, configuration, adjustment, and also trouble shooting on genset control panel, Like EMCP 2 & 3.2
    Voltage regulator VR6 & VR3
    Speed controller Woodward governor 2301, 2301A
    LVAC/DC Loop Testing of control wiring.
    CT & VT Circuit Testing.
    HV Equipment testing (Auto/Power Transformers, Circuit breakers,
    Testing of Rectifier Bridge, diode assembly, control relay, actuator battery charger, self-starter and dynamo.
    • Analyst of spare parts old, new & wear.
    • Followed HSE rules & regulation during working in critical sites
    • Performed Routine & break down Maintenance
    • Performed diagnostics and trouble shooting on customer complain
    • Performed Generator Upgrading, Top end & Major overhauling of engines with Electrical & Mechanical team
    • Working on utility all equipment
    • Work on different operating panel Terberg Panel & Deep Sea
    • Cable Tray installation, Cable Glanding.
     Knowledge of P.L.C, HMI & SCADA Panel
     Machine Shop Routines
     Electrical knowledge
     Typing & Talking skills of Urdu English Arabic and Hindi
     Knowledge to run different types of Managing Software and also Computer Hardware. Familiar with basic operating systems like
     Microsoft Word, Excel, Outlook and PowerPoint, Oracle, Sap
     (MS-Dynamic 2012 ERP Software) creating experience of PR & PO

    Father’s Name : Abdul Qayyum Khan
    Date of Birth : 30-11-1990
    Passport No : NV4128901
    Skype ID : sharoz.khan77
    Nationality : Pakistani
    Marital Status : Single
    Religion : Islam

    Will be furnished upon request

    Continue reading